Mounting
Tire Rim Matching and Inflation
1. Clean the sensor mount surface on wheel. Inspect and lubricate O-ring. |
2. Insert the sensor and properly torque to the specification provided
in the manufacturer’s service manual. |
3. Thoroughly lubricate rim flange, drop center, bead seats, and safety humps. |
4. Thoroughly lubricate tire bead face and inner toe area. |
5. Place tire over left and under right of mount head, twist tire clockwise to lock to rim. |
6. Verify sensor is just ahead of traction point. Mount bottom bead. |
7. Place upper bead onto mount head. Install bead depressor. Lock tire to rim behind sensor as shown. Begin inserting blocks. |
8. Position and lock column. Place upper roller behind mount head. Push on tire to keep bead down. |
9. Grasp tire and hold bead depressor. Rotate clockwise to install upper bead. |
10. Depress upper roller and remove mount head. |
11. Rotate counterclockwise and remove bead depressor when close to roller. Retract upper roller. Unlock and swing away bead roller assembly. |